Advantages of scissor hydraulic lifting platform:

1. Scissor hydraulic lift has a scissor bracket under the platform, so it runs very smoothly when it is loaded.

2. The supporting load has simple force and low stress, which prolongs its service life.

3. Now the installation is more convenient, as long as the ground is flat and the concrete in the pit is firm, you can fix it in the pit during installation.

4. Due to the large platform, it can be used without installing guide rails around, saving a lot of space.

5. Because it is a scissor bracket mechanism, it is safe to use and not prone to safety accidents.

Disadvantages of scissor hydraulic lifting platform:

1. Due to its relatively high height, a deeper foundation pit needs to be dug on site.

Advantages of straight top guide rail hydraulic lifting platform:

1. Since the height is relatively low, there is no need to dig deep foundation pits.

Disadvantages of straight top guide rail hydraulic lifting platform:

1. Since there is no support mechanism under the platform, accidents are prone to occur, once the wire rope breaks. The platform will fall down immediately, prone to safety incidents.

2. On-site installation is complicated, and guide rails must be installed around, which takes up a lot of floor space.

3. Because the platform is relatively large and the oil cylinder is not under the platform, the synchronization effect of the two hydraulic cylinders on both sides is required to be better. If the load is eccentric, it is easy to jam in operation, which will cause the lifting platform to tilt and jam.

4. Because it is a straight top guide rail type, the oil cylinder is relatively long and it is inconvenient to maintain.

5. As the platform is relatively large, if it is slightly inclined, it will cause greater friction between the pulley and the guide rail during operation, thereby reducing its service life.

6. The straight top rail type is a new type of product, and the technology is not as mature as the scissor type.